User Manual - Page 125

For 2016 BMW X3 SDRIVE28I.

Loading ...
Loading ...
Loading ...
LED lights up orange or goes out respec‐
tive to their individual settings.
Adjust as needed. Individual settings are
stored for the profile currently in use.
Press button again:
All Intelligent Safety systems are
activated.
The LED lights up green.
Hold down button:
All Intelligent Safety systems are
turned off.
The LED goes out.
Display
Lamp in the exterior mirror housing
Information stage
The dimmed lamp in the exterior mirror hous‐
ing indicates when there are vehicles in the
blind spot or approaching from behind.
Warning
If the turn signal is set while a vehicle is in the
critical zone, the steering wheel vibrates briefly
and the lamp in the exterior mirror housing
flashes brightly.
The warning stops when the turn signal is
switched off, or the other vehicle leaves the
critical zone.
System limits
The system may not be fully functional in the
following situations:
When a vehicle is approaching at a speed
much faster than your own.
In heavy fog, rain or snowfall.
In tight curves or on narrow lanes.
If the bumper is dirty or iced up, or covered
with stickers.
A Check Control message is displayed when
the system is not fully functional.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov‐
erned by the following:
FCC ID:
NBG009014A.
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
This device may not cause harmful inter‐
ference, and
this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.
Seite 121
Safety Controls
121
Online Edition for Part no. 01 40 2 960 386 - II/15
Loading ...
Loading ...
Loading ...