Loading ...
Loading ...
Loading ...
10 11USING YOUR REFRIGERATOR
USING YOUR REFRIGERATOR
Refrigerators work by transferring heat from the food
inside to the outside air. This operation makes the back
and sides of the refrigerator feel warm or even hot
particularly at start-up and on warm days – this is normal.
Avoid placing food against the air vents in the refrigerator
as it affects efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer’s interior. This is normal and will clear after a few
days. If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new refrigerator uses a high-speed compressor,
along with other energy-efficient components, which may
make unusual sounds and be more noticeable at night
and quieter times. These sounds simply indicate your
refrigerator is working how it should. They include:
• Compressor running noises;
• Air movement noise from the small fan motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic
defrosting; and
• A clicking noise, prior to compressor start-up.
Further details can be found in the Troubleshooting
Guide.
Temperature Sensors
Avoid loading food against your freezer temperature
sensor.
Doing so may adversely affect freezer temperatures. If
warm food is inadvertently loaded against the sensor, it
may also set off the freezer temperature alarm for up to
50 minutes after the food is loaded against the sensor.
Twist ice and Serve
To use, remove the tray, fill with water and place back in
the freezer.
Once ice has formed (approximately 3 hours) simply twist
the knob at the front clockwise until the ice drops into the
bin below.
CHANGING THE WATER FILTER
CHANGING THE WATER FILTER
TIPS & INFORMATION
IMPORTANT
• Always fit the filter as per manufacturer’s instructions.
• If you need to replace the water tube, only use
approved water quality piping that meets the
pressure requirements.
• Make sure your refrigerator is level to avoid uneven
ice cubes.
• Replace filter at suggested intervals to avoid water/
ice reduction and irregularities in taste.
• Remove and clean ice bin once a month, discarding
unused ice cubes. This will ensure fresh, clean ice and
smooth operation of your ice maker.
• Clean and empty the dispenser drip tray regularly to
avoid overflow.
WARNING
WARNING
If you have not used the dispenser for some time, discard
the first seven or eight cups of water and any ice that the
ice maker produces in the first 24 hours (contaminants
could have settled in the water pipes).
Water filter
The water filter is located at the top left side of the fresh
food compartment.
Replacing the water filter
You should change the water filter every six months to
ensure the highest possible water quality.
If your refrigerator has not been used for a period of time
(during a house move for example), change the filter
before reinstalling the refrigerator.
It is not necessary to turn the water supply off to change
the filter. Be ready to wipe up any small amounts of water
released during the filter replacement.
1. Ensure that the ice maker is turned off.
2. Remove the filter by turning anti-clockwise 180˚
3. Slide the old water filter cartridge straight out of the
housing and discard it.
PureSou rce
U l t r a 2
Ice & Water Filtration System
4. Unwrap the new filter cartridge and using the
alignment guide, slide it gently into filter housing until
it stops against the filter connection at the back of
the housing.
PureSou rce
U l t r a 2
Ice & Water Filtration System
5. Engage the filter by firmly rotating clockwise until
the filter snaps into position (once engaged the filter
cannot be rotated further).
PureSou rce
U l t r a 2
Ice & Water Filtration System
6. Press a drinking glass against the water dispenser
while checking for any leaks at the filter housing. Any
spurts and sputters that occur as the system purges
air out of the dispenser system are normal.
7. After filling one glass of water, continue flushing the
system for about four minutes.
8. Turn on the ice maker.
9. When the filter has been replaced press and hold the
‘Ice and Water’ button for three seconds to reset the
filter replace timer.
Ice and water dispenser features
The ice and water dispenser conveniently dispenses cool,
filtered water and ice cubes or crushed ice.
To operate the ice dispenser, select an ice option using
the electronic display and press a glass against the
dispensing paddle.
To stop dispensing ice, pull the glass away from the
dispensing paddle. Remove the glass from the dispenser
paddle when it is approximately half full.
Ice already in the chute may cause the glass to overflow
or back up into the chute and cause a blockage (refer to
troubleshooting guide on how to unblock the ice chute).
dispensing
paddle
drip tray
To operate the water dispenser, select the water option
on the electronic display, press a glass against the
dispensing paddle.
To stop dispensing water, pull the glass away from the
water dispensing paddle. As the ice and water cut-off is
not instant, leave glass under the dispenser until the ice
and water has completely stopped to avoid spills.
A drip tray located at the base of the dispenser (see
diagram above) will catch small spills and allow them to
evaporate.
Opening the freezer door will de-activate the ice
dispenser.
WARNING
CAUTION
Do not pour water or excess cubes into the drip tray
because it is not connected to a drain.
WARNING
WARNING
Do not use fragile glass for dispensing water or ice – risk
of injury from broken glass.
WARNING
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED
lights should be serviced by the manufacturer, its service
agent or similarly qualified technician.
Refer to the warranty page for contact details.
Loading ...
Loading ...
Loading ...