Westinghouse GGR475WLPG User Manual

Loading ...

INSTALLATION

WARNING

Use an authorised person.

As stated in the local municipal building codes and other

relevant statutory regulations.

• Refer to data plate for rating information and circuit

diagram. The data plate is positioned behind the bottom

of the oven door. The circuit diagram is positioned on

the top panel of the appliance.

WARNING

This appliance must be properly earthed

• Do not lift the appliance by the door handles.

• Prepare the cupboard opening to match your appliance

measurements. (See diagrams)

• Slide appliance into the cupboard, ensuring that the

supply cable (where fitted) does not kink.

• To prevent tipping, use the screws supplied to secure

your oven into the cupboard. Use just 2 screws for

underbench and separate grill underbench ovens, and

4 screws for separate grill wall ovens. Remove the

bottom door in separate grill wall ovens to provide

access to the bottom 2 screwing points.

• For appliances fitted with a flexible supply cord,

if the cord is damaged, it must be replaced by the

manufacturer or its service agent or similarly qualified

person in order to avoid a hazard. The plug must be

accessible after installation.

• Where the appliance is built into a cabinet, the cabinet

material must be capable of withstanding 70°C.

Installation into low temperature tolerant cabinetry

(e.g. vinyl coated) may result in deterioration of the low

temperature coating by discolouring or bubbling.

• If the appliance is installed adjacent to vinyl-wrapped

surfaces, use an installation kit available from the vinyl-

wrap supplier.

• Electrolux Home Products cannot accept responsibility

for damage caused by installation into low temperature

tolerant cabinets.

• After installation, test and ensure that the appliance

operates correctly before handing it over to the customer.

It is recommended that this product is not installed in an

unvented living space, particularly if that space incorporates

sleeping quarters.

CAUTION

To avoid any potential hazard, you must follow our instructions below

when you install your appliance. Failure to install the appliance correctly

could invalidate any warranty or liability claims and lead to prosecution.

This appliance is only suitable for connection to fixed

consumer piping where the maximum over-pressure is

limited to 14kPa or less. Refer clause 5.2.1 of AS5601.

CABINET CONSTRUCTION FOR YOUR APPLIANCE

For the best integration within a kitchen, install this

appliance in a standard 600mm wide cupboard that gives

a flush fit with the surrounding cupboard fronts (Figure A).

A recess of 20mm is ideal. It can also be installed using

a proud fit with the surrounding cupboard (Figure B).

NOTE: Your appliance must be mounted on a flat surface

for the full width and depth of the product.

16mm Cleat

Figure B – Proud fit (top view)

Cupboard front

20mm

Infill panel

565

Figure A – Flush fit (top view)

Cupboard door Cupboard door

600