Loading ...
Loading ...
Loading ...
7English
PREPARATION
Installation
If you have a problem with installing the wall mount (battery charger),
contact a Samsung service center.
Do not install the wall mount (battery charger) near water, in an area with
excessive moisture, or near window, etc.
Do not install the wall mount (battery charger) on a wall behind which
pipes (gas or water) or electrical cables are installed.
Injury or product malfunction from not installing the wall mount (battery
charger) may not be compensated.
The wall mount (battery charger) should be installed on the wall where it
can be rmly xed.
To install the wall mount (battery charger) on a soft wall such as plaster
board, make sure that the mounting location is backed by a stud and
that you screw the supporting screws into the stud. Otherwise, the wall
mount can fall and cause an injury or severe product damage.
Power related
WARNING
When installing the wall mount (battery charger), do not bend the power
cord with excessive force or put heavy objects on the power cord.
Otherwise, electric shock or re may occur.
If there is dust, water, etc. on a pin or contact point of the power plug,
wipe them carefully.
Otherwise, abnormal operation or electric shock may occur.
Do not pull the cord and do not touch the plug with wet hands.
Do not plug the vacuum into a power source with the incorrect voltage.
Do not plug the vacuum into a multi-plug outlet or power strip. Do not
leave the power cord lying on the oor. Attach the cord close to a wall.
Otherwise, electric shock or re may occur.
Stick_VS8000-V2_EN_00803R-03_SA.indd 7 2019-01-03 오후 4:43:13
Loading ...
Loading ...
Loading ...