Loading ...
Loading ...
Loading ...
Master Settings—Master Edit
CP300 Owner’s Manual
55
Reference
The pitch of a note can be shifted upward or downward in
steps of an octave in each zone. You can adjust the offset up
or down over a maximum range of two octaves.
Setting targets: Zone 1, Zone 2, Zone 3, Zone 4
Setting range: -2 – 0 – +2
-2 (two octaves lower), 0 (no pitch shift), +2 (two octaves higher)
Default setting: 0
The Octave setting is effective when the [MASTER] button is on.
It also affects the following settings:
Internal: [VOICE EDIT] Octave setting for each Voice
MIDI Output: [MASTER EDIT] Octave setting for each zone
When the [MASTER] button is off, Octave affects the following:
Internal and MIDI Output: [VOICE EDIT] Octave setting for each
Voice
Turns the sound from the internal tone generator on or off
for each part.
Setting targets: Zone 1, Zone 2, Zone 3, Zone 4
Settings: On/Off
Default setting: On
Specifies the channels over which the CP300 transmits
MIDI data from each zone.
Setting targets: Zone 1, Zone 2, Zone 3, Zone 4
Setting range: Ch 1 – Ch 16, Off
Default settings:
n When the [MASTER] button is turned off, the “MIDI
Out Channel” setting in the MIDI Settings menu is used
for MIDI channel assignments.
Octave Setting for Connected External Tone
Generator
Internal Tone Generator On/Off Status
Octave
Zone 1 0
NO YES
A
B
DC
InternalTG
Zone 1 On
NO YES
A
B
DC
MIDI Transmission Channel for Master Mode
Zone 1 Ch 1
Zone 2 Ch 2
Zone 3 Ch 3
Zone 4 Ch 4
MidiOutChannel
Zone 1 Ch1
NO YES
A
B
DC
Loading ...
Loading ...
Loading ...