Loading ...
Loading ...
Loading ...
44
Failure
indicator
Display
message
Possible Cause Possible Solution
F20 or
F60
Failure of an electronic com-
ponent
Switch o and unplug the
washing machine; close the water
tap.
Call After-Sales Service
SERVICE
F24 Too much laundry for a pro-
gramme with small maxi-
mum load
Select and start programme
“Rinse and Spin” to complete the
interrupted wash programme.
Do not overload the washing
machine. Respect the maximum
load size of the programmes
indicated in the Programme
Chart.
Too much inlet water Turn o the water tap. Press and
hold On/O for at least 3 seconds
to drain the water; wait until the
drain phase has ended (End will
appear on display).
Turn on the water tap again. – If
water immediately ows into the
washing machine (without having
started a programme), there is a
failure of an electrical component.
Close water tap, switch o and
unplug the washing machine.
Contact our After-Sales Service.
F02 Water stop failure – water
leakage detected in bottom
tray.
Press On/O for at least 3
seconds. If failure persists, contact
After-Sales Service.
All other F.. failures Failure of an electrical
component
Press On/O button for at least
3 seconds to reset the failure. If
problem persists, switch o and
unplug washing machine. Close
water tap. Call After-Sales Service.
Loading ...
Loading ...
Loading ...