Loading ...
Loading ...
Loading ...
6
In case of malfunction
If a malfunction occurs on the appliance, please look first in the “Troubleshooting”
section of these instructions. If the information given there does not help, please do
not perform any further repairs yourself.
Under no circumstance should you attempt to repair the appliance yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning.
Contact your local Service Force Center.
Remove transport packaging
The appliance and the interior fittings are protected for transportation. Pull off the
adhesive tape on the left and right side of the door. You can remove any remnants of
adhesive using white spirit. Remove all adhesive tape and packing pieces from the
interior of the appliance.
Installation
Installation Location
Before installing, carefully read the instruction in order to avoid a certain number of
problems.
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct
sunlight etc. Maximum performance and safety are guaranteed by maintaining the
correct indoor temperature for the class of unit concerned, as specified on the
rating plate. This application perform well from N to ST. The Appliance may not
work properly if it is left for a longer period at a temperature above or below the
indicated range.
IMPORTANT!—There is a need of good ventilation around the fridge for easy
dissipation of heat, high efficiency of refrigeration and low power consumption. For
this purpose, sufficient clear space should be available around the fridge. It is
advisable for there to be 75mm separating the back of the fridge to the wall, at
least 100mm of space at its two sides, height of over 100mm from its top and a
clear space upfront to allow the doors to open 160°.
Loading ...
Loading ...
Loading ...