Loading ...
Loading ...
Loading ...
13
After everything is dry place appliance back into service.
Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do
not install the appliance near cookers, radiators or other sources of warmth. High
ambient temperatures cause longer, more frequent operation of the compressor
2. In order to make the cooling system work efficiently, please make sure the side
plates and back plate of the product are with some distance from the wall. It is
strongly recommended that its back is 75mm away from the wall, its sides at least
have a space of 100mm separately and the height from over its top is not less than
100mm.
3. When the product works, please do not open the door too often or leave the door
open any longer than necessary.
4. Do not set temperature any colder than necessary.
5. The direct cooling refrigerator (with a freezer) needs to be defrosted when
necessary. This will improve the cold transfer and reduce energy consumption.
6. The sketch map shows the right combination of the shelves which can lead to the
more energy efficiency. If users adjust the combination, it would result in the
energy-consuming.
7. Store food logically. Do not exceed the storage period specified.
Troubleshooting
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can rectify yourself
using the following instructions. Do not perform any other work on the appliance if
the following information does not provide assistance in your specific case.
Important!
Repairs to refrigerators/freezers may only be performed by competent service
engineers. Improper repairs can give rise to significant hazards for the user. If your
appliance needs repairing, please contact your specialist dealer or your local
Service Force Center.
Loading ...
Loading ...
Loading ...