Loading ...
Loading ...
Loading ...
14
Symptom Possible Cause Remedy
Appliance is not switched on. Switch on the appliance.
Mains plug is not plugged in or
is loose.
Insert mains plug.
Fuse has blown or is defective.
Check fuse, replace if
necessary.
Appliance does not
work.
Socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
Appliance cools too
much.
Temperature is set too cold.
Turn the temperature
regulator to a warmer
setting temporarily.
Temperature is not properly
adjusted.
Please look in the “initial
Start Up” section.
Door was open for an extended
period.
Open the door only as long
as necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature
regulation to a colder
setting temporarily.
The food is too
warm.
The appliance is near a heat
source.
Please look in the
“installation location”
section.
Heavy build-up of
frost, possibly also
on the door seal.
Door seal is not
air-tight(possibly after
reversing the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer(on a cool
setting). At the same time
shape the warmed door
seal by hand such that it
sits correctly.
Appliance is not level. Readjust the feet.
The appliance is touching the
wall or other objects.
Move the appliance
slightly.
Unusual noises.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend
the component out of the
way.
The compressor
does not start
immediately after
changing the
temperature
setting.
This is normal, no error has
occurred.
The compressor starts
after a period of time.
Loading ...
Loading ...
Loading ...