Loading ...
Loading ...
Loading ...
9
scratching.
5. Remove the plug(9) and transfer it to the uncovered hole at the right side. Be
sure to press the button firmly into the hole.Remove the two bolts(7) that hold the
lower hinge(4) on the right side.
6. Remove the screw-type leveling front leg(8) and transfer it to the right side as
shown in the figure below.
7. Set the door into it's new place making sure the pin enters the bushing at the
lower frame section(hole).
8. Secure the upper hinge(3) previously removed in step 3 on the left side. Make
sure the pin enters the bushing at the upper frame section(hole).
9. Loosely secure the lower left hinge(4) and do not tighten the bolts until the door
is in the closed position and leveled.
10. Insert the plug buttons(5) on the uncovered holes(right side).
11. Replace the upper hinge cap(1).
Warning!
When changing the side at which the door opens, the appliance must not be
connected to the mains. Remove plug from the mains beforehand.
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth
contact.
The temperature selector knob is located on the side of the freezer compartment.
7
2
1
0
4
6
5
3
THERM OSTAT
CONTROL DIAL
Setting 0 means:
Turning the temperature control to "0" position stops the cooling cycle, but does not
shut off the power to the refrigerator.
Turning clockwise in direction Refrigerating unit on, the latter then operating
automatically. If the unit is unplugged, power lost, or turned off, you must wait 3 to
5 minutes before restarting the unit. If you attempt to restart before this time delay,
Loading ...
Loading ...
Loading ...