Loading ...
Loading ...
Loading ...
12 English
Maintenance
Maintenance
Cleaning
Clean the oven regularly to prevent impurities from building up
on or inside the oven. Also pay special attention to the door, door
sealing, and turntable and roller ring (applicable models only).
If the door won’t open or close smoothly, rst check if the door
seals have built up impurities. Use a soft cloth in soapy water to
clean both the inner and outer sides of the oven. Rinse and dry well.
To remove stubborn impurities with bad smells
from inside the oven
1. With an empty oven, put a cup of diluted lemon juice on the
centre of the turntable.
2. Heat the oven for 10 minutes at max power.
3. When the cycle is complete, wait until the oven cools down.
Then, open the door and clean the cooking chamber.
CAUTION
• Keep the door and door sealing clean and ensure the door
opens and closes smoothly. Otherwise, the oven’s lifecycle
may be shortened.
• Take caution not to spill water into the oven vents.
• Do not use any abrasive or chemical substances for cleaning.
• After each use of the oven, use a mild detergent to clean the
cooking chamber after waiting for the oven to cool down.
Replacement (repair)
WARNING
This oven has no user-removable parts inside. Do not try to
replace or repair the oven yourself.
• If you encounter a problem with hinges, sealing, and/or the
door, contact a qualied technician or a local Samsung service
centre for technical assistance.
• If you want to replace the light bulb, contact a local Samsung
service centre. Do not replace it yourself.
• If you encounter a problem with the outer housing
of the oven, rst unplug the power cord from the
power source, and then contact a local Samsung
service centre.
Care against an extended period of disuse
• If you don’t use the oven for an extended period of time,
unplug the power cord and move the oven to a dry, dust-free
location. Dust and moisture that builds up inside the oven may
affect the performance of the oven.
NQ50K3130BS_EU_DG68-00523K-00_EN.indd 12 4/15/2016 11:51:42 AM
Loading ...
Loading ...
Loading ...