Loading ...
Loading ...
Loading ...
STEP 1: PRESSURE REGULATOR CONFIGURATION
The pressure regulator supplied with the appliance is a
convertible type pressure regulator for use with Natural
Gas at a nominal outlet pressure of 4" w.c. or LP gas at a
nominal outlet pressure of 10" w.c. and it is pre-arranged
from the factory to operate with Natural Gas. It can be
converted for use with propane gas by following these
steps:
a. Unscrew by hand the upper metal cap of the regulator.
b. Unscrew by hand the silver plastic piece screwed under
the above mentioned metal cap. The silver plastic piece
has arrows indicating the position for natural gas (NAT)
and LP gas (LP). Reverse its direction and screw it back
firmly against the cap.
c. Screw by hand the metal cap in the original position on
the regulator.
STEP 1a
INSTALL GUIDE
STEP 1b
STEP 1c
23
Loading ...
Loading ...
Loading ...