Jitterbug J User Manual

Loading ...

Section9

116 Bluetooth

Section9

Bluetooth 117

If you are not going to be using your Bluetooth headset, be sure to keep your

Jitterbugsetto“Bluetooth OFF.”TheJitterbugbatterylifeisshortenedwhen

the Bluetooth setting is turned on.

Turning The Bluetooth Feature Off:

1. Use the “Up/Down” button on your Jitterbug to scroll through all of the available

options within Settings.

2. Press the

button on your Jitterbug once the “Bluetooth ON” option is highlighted

in gray in the middle of the Inside Display.

3. The screen will then read “Bluetooth OFF” indicating that you have successfully

turned off your Bluetooth.

4.WhenyourJitterbugissetwiththe“Bluetooth OFF,” you will notice that the Bluetooth

symbol is no longer in the top right corner of the Main Screen.

Setting Your Samsung WEP 470 Premium Bluetooth Headset To Pairing

Mode

TherststepinsettingupanyBluetooth device is called “Pairing.” This step is required

because there are no wires to link your Jitterbug to your Bluetooth device. “Pairing”

happens when your Jitterbug and your Bluetooth device agree to communicate with

one another. By “Pairing,” your Jitterbug recognizes your Bluetooth device and the two

devices automatically accept communication from each other.

BesuretoturnonyourSamsungWEP470PremiumBluetoothheadsetbeforeentering

Pairing Mode. To turn on the device, simply move the switch on the side of the headset to

the“on”position-youwillseetheorangeareadisappearwhentheheadsetison.Whenthe

device is on, to begin pairing, press and hold the “Answer/End”

button in the middle

of your Bluetooth headset for several seconds until the blue indicator light turns on and

stays lit after blinking. This indicates that your headset is now in Pairing Mode.

1008301_GreatCall_jB_HowToGuide_R6.indd 126-127 10/13/10 12:12 PM

Loading ...

User Manual - Page 65