Loading ...
Loading ...
Loading ...
14
NS-HMSB20
www.insigniaproducts.com
USB sound source
1 Plug a USB thumbdrive (with WAV files) into the USB port on the back of your
soundbar.
2 Go to Connecting the AC power adapter on page16.
3 After your soundbar is plugged in and turned on, press the (sound source
selector) button repeatedly on your soundbar or the SOURCE button on your
remote control until the source indicator turns purple.
4 Control USB playback by pressing the (play/pause) PAIR, (previous),
and (next) buttons on the remote control.
Bluetooth sound source
Before you can use your soundbar with a Bluetooth device, you need to pair your
device to the soundbar. Go to Connecting the AC power adapter
on page 16. After
your soundbar is plugged in and turned on, do the following:
Pairing your devices
1 Select Bluetooth as the input source by pressing the (sound source
selector) button repeatedly on your soundbar or the SOURCE button on your
remote control. The status indicator blinks blue.
2 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search
for available devices. For additional information on pairing your device, see
your device’s documentation.
3 On your Bluetooth device, select “NS-HMSB20” from the device list. Repeat
steps 1-2 if “NS-HMSB20” is not displayed.
4 If a PIN code is requested, enter “0000.”
5 When the Bluetooth connection has been established, the status indicator
turns solid blue.
Note: If you mount your soundbar on a wall, you will not be able to use a USB
thumbdrive as a sound source.
Note: If playback does not begin immediately, press the (play/pause)/
PAIR button on the remote control.
Notes:
• Your soundbar must be on to make a Bluetooth connection.
• Place the Bluetooth device within 33 ft. (10 m) of your soundbar.
Notes:
• Some devices, such as an iPhone, connect immediately after pairing so the
status indicator on your soundbar remains on. Other devices, such as
notebook computers, may ask you if you wish to connect. In this instance,
the status indicator continues to blink until a connection is established.
• Your soundbar saves pairing information for up to eight devices. However,
it can only be connected and play content from one device at a time.
• When you turn on your soundbar, it automatically connects to the last
connected device if that device is in range. To connect to a different paired
device, turn off Bluetooth or unpair from the currently paired device and
manually connect to the other paired device.
Loading ...
Loading ...
Loading ...