Loading ...
Loading ...
Loading ...
15
How to save energy
(1) lnstall the appliance in a cool, well ventilated room, far from a heat source (radiator, cooker,
etc.), not in direct sunlight.
(2) The time and frequency for opening of the doors should as short as possible, For example,
store food in an organized way will reduce your time when you take something out from the
appliance.
(3) Store the food covered or packaged.
(4) Let the hot food or drinks to cool down before placing them in the appliance.
(5) When thawing frozen food, place it in the refrigerator compartment. You can use the low
temperature of the frozen food cool the food in the refrigerator compartment.
(6) Do not store too much food in the appliance, this may block air circulation.
(7) Temperature setting , the lower the temperature set in the compartment, the higher the energy
consumption. So it is better to set a higher temperature if your food storage condition is optimal.
(8) Keep the large freezing drawer closed, take out the small freezing drawer, and then take out
and put the food in the small freezing drawer; in this way, larger using space can be achieved and
power consumption of refrigerator can be reduced.
About Refrigerating Chamber
Please put frequently use or short-term storage
items in this chamber.
Adjusting the temperature level can maintain the average
temperature between 0-10 For most of the areas in the
refrigerating chamber, but it can not make long-term preservation
for food, and the refrigerating chamber can only be used as a
short-term storage chamber.
The height of shelf is adjustable
The shelves can be adjusted to your desired height for food storage.
To remove the shelf, lift the shelf in an upwards incline position,
then pull out.To relocate, tilt the front of the shelf up and guide the
shelf hook into the slots at the desired height. Then lower the front
of the shelf to lock the hook into place.
Caution
Make sure the both ends of shelf are on level position. If it can not be level,
the shelf may fall or the food may drop out.
Lift up and take out
Upwards
incline
removing
Loading ...
Loading ...
Loading ...