Loading ...
Loading ...
Loading ...
9
6. Installing the Kick Panel
The Kick Panel should be located inside the refrigerating chamber upon unboxing your
appliance. Take out the Kick Panel and install it to the front bottom of the appliance.
Refer to illustration below. Use 2 screws supplied with the appliance.
Caution
Please wear gloves when dismantle the bottom decorative strip and adjustable
leveling legs to avoid injury to your hands.
7. Disassembly and Assembly of the Handle of Refr. Door
Find the door grub screws and screw them into the holes on the door (Fig. 1)
Get one handle and align the holes on the handle to the screws on the door.
Use the hex allen key to screw the hex screw into the grub screw (Fig. 2).
Follow the same step with other handle. Both handles can be removed by
reversing this procedure.
8. Disassembly and Assembly of the Handle of Freezer Door
Find the door grub screws and screw them into the holes on the door (Fig. 3)
Get one handle and align the holes on the handle to the screws on the door.
Use the hex allen key to screw the hex screw into the grub screw (Fig. 4).
Follow the same step with other handle. Both handles can be removed by
reversing this procedure.
Preparation
(Fig. 1)
(Fig. 2)
Loading ...
Loading ...
Loading ...