Loading ...
Loading ...
Loading ...
85
Clean the knobs and the control panel with a
damp cloth.
To clean the grids and hob burners, remove them
from their housing by lifting them upwards as
shown in the figure, and immerse them in a solu-
tion of warm water and non-abrasive detergent for
about ten minutes. Rinse and dry carefully.
Always check that none of the burner openings
is clogged.
Be sure to refit the burner correctly, checking the
flame is uniform.
We recommend carrying out this operation at least
once a week and each time it is necessary.
In order for the igniter plugs and thermocouples to
operate correctly, they must be kept clean at all
times. Check them frequently and, if necessary,
clean them with a damp cloth. Any dry residue
should be removed with a toothpick or needle,
taking care not to damage the insulating
ceramic part.
Please ensure that the parts are completely dry
before using the burner again.
In order to preserve the oven well, it should be
cleaned regularly, each time it is used if possible,
after leaving it to cool: in this way it is possible to
remove any residue more easily, preventing it from
burning the next time the oven is used.
Clean the stainless steel parts and enamelled parts
as described in the corresponding sections
"Cleaning stainless steel surfaces" and "Cleaning
enamelled surfaces".
Take out all the removable parts and wash them
separately. Rinse and dry thoroughly with a clean
cloth.
Cleaning the grids
and burners
Cleaning the knobs
and the control
panel
Cleaning the igniter
plugs and thermo-
couples
Cleaning the oven
Loading ...
Loading ...
Loading ...