Loading ...
Loading ...
Loading ...
30
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
Reversing the door swing/Removing the doors.
Important Notes
NOTE: Doors on dispenser models do not reverse. However, if you need to
remove the doors on a dispenser model, first disconnect the water line to the
dispenser. See the Removing the doors section. To rehang the doors, see
the Rehanging the doors section.
When reversing the door swing (on non-dispenser models):
■ Read the instructions all the way through before starting.
■ Handle parts carefully to avoid scratching paint.
■ Set screws down by their related parts to avoid using them in the
wrong places.
■ Provide a non-scratching work surface for the doors.
IMPORTANT: Once you begin, do not move the cabinet until
door-swing reversal is completed.
These instructions are for changing the hinges from the
right side to the left side—if you ever want to change the
hinges back to the right side, follow these same instructions
and reverse all references to left and right.
Read these instructions completely and carefully.
■ Phillips screwdriver
■ Masking tape
■ T20 or T25 Torxdriver, whichever your model requires
■ Putty knife or thin-blade screwdriver
■ 3/8″socket and ratchet (a 6-point socket is recommended)
Tools Required
Loading ...
Loading ...
Loading ...