Loading ...
Loading ...
Loading ...
Care and cleaning of the refrigerator.
22
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
Behind the Refrigerator
Be careful when moving the refrigerator away from the wall. All
types of floor coverings can be damaged, particularly cushioned
coverings and those with embossed surfaces.
Pull the refrigerator straight out and return it to position by
pushing it straight in. Moving the refrigerator in a side direction
may result in damage to the floor covering or refrigerator.
When pushing the refrigerator back, make sure you don’t roll over the power cord
or icemaker supply line (on some models).
For long vacations or absences, remove food and unplug the
refrigerator. Move the fresh food control to the
OFF
position, and
clean the interior with a baking soda solution of one tablespoon
(15 ml) of baking soda to one quart (1 l) of water. Leave the
doors open.
Move the icemaker feeler arm to
STOP
(up) position and shut
off the water supply to the refrigerator.
If the temperature can drop below freezing, have a qualified
servicer drain the water supply system (on some models) to
prevent serious property damage due to flooding.
Preparing for Vacation
If the doors need to be removed, see the
Removing the doors
section.
On dispenser models, the water line to the dispenser must be
disconnected before the doors are removed.
Secure all loose items such as grille, shelves and drawers by taping
them securely in place to prevent damage.
Be sure the refrigerator stays in an upright position during moving.
Preparing to Move
To replace a burned-out bulb, unplug the refrigerator from its
electrical outlet, remove the light shield, unscrew the bulb when
cool and replace it with an appliance bulb of the same or lower
wattage.
Turning the control to the OFF position does not remove power to the light circuit.
Light Bulb Replacement
Loading ...
Loading ...
Loading ...