Loading ...
Loading ...
Loading ...
18
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
About the ice and water dispenser.
On some models
Rotate
Drive
Mechanism
Ice Storage Bin
To remove:
Lift the front of the bin and pull the bin straight out
while supporting it at front and rear.
To replace:
Slide it back on the ice bin shelf. If the bin does not go
all the way back, remove it and rotate the drive
mechanism 1/4 turn. Then push the bin back again.
To Use the Dispenser
Press the rim of the glass gently against the dispenser pad.
Set the selector switch to
ICE CUBES,CRUSHED ICE
or
WATER
(on some models).
The spill shelf is not self-draining. To reduce water
spotting, the shelf and its grille should be cleaned
regularly.
If no water is dispensed when the refrigerator is first installed, there
may be air in the water line system. Press the dispenser pad for at
least two minutes to remove trapped air from the water line and to
fill the water system. To flush out impurities in the water line, throw
away the first six glassfuls of water.
CAUTION: Never put fingers or any other
objects into the ice crusher discharge opening.
Spill Shelf
Loading ...
Loading ...
Loading ...