Loading ...
Loading ...
Loading ...
30
Wireless
7
Remove side sections (if necessary)
Do not remove outside side sections
on switches at the end of gang.
Each dimmer has inside
side sections removed.
Dimmer in the middle has
all side sections removed.
8
Connect the new Caséta Wireless dimmer
Tagged Wire
Note wire color
tied to blue wire
Ground
(Green Wire)
White *
9
Mount the Caséta Wireless dimmer
10
Attach the wallplate
11
Remove existing toggle switch from wall at Location 2
3-Way Installation - Caséta Wireless In-Wall PRO Dimmer with Mechanical Toggle Switch
12a
Modify wiring for existing toggle switch
When installing more than one Caséta Wireless dimmer in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Location 1
Location 2
Location 1
Red
Blue
Black
‘snap’
Wallplate
Adapter
Wallplate
Location 1
* If available,
connect the
neutral wire from
the wallbox to the
white wire on the
dimmer. If neutral
is not available,
cap the white
wire with a wire
connector.
Neutral required
for: MLV loads,
LED drivers,
PHPM-PA,
PHPM-3F,
GRX-TVI.
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W + 1000 W 800 W 600 W
1 W – 25 W + 900 W 750 W 550 W
26 W – 50 W + 800 W 700 W 500 W
51 W – 75 W + 700 W 600 W 450 W
76 W – 100 W + 600 W 500 W 400 W
101 W – 125 W + 500 W 400 W 300 W
126 W – 150 W + 400 W 300 W 200 W
151 W – 175 W + 300 W 200 W 100 W
176 W – 200 W + 200 W 100 W 50 W
201 W – 225 W + 100 W 50 W 0 W
226 W – 250 W + 0 W 0 W 0 W
A
B
C
B
B B
C
B
A
Important note:
Removing side sections reduces the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
Ground - Green / Bare Copper
(keep connected to switch)
Different Color
Screw / Tagged Wire
(disconnect from switch)
Noted wire color
from Step 8
(keep connected to switch)
Location 2
Remaining Wire
(disconnect from switch)
Loading ...
Loading ...
Loading ...