Loading ...
Loading ...
Loading ...
REFRIGERATOR INSTALLATION
12
REMOVING AND REPLACING REFRIGERATOR DOORS
1. Removing Refrigerator Door
NOTE: Handle appearance may vary.
IMPORTANT: Before you begin, turn the refrigerator OFF and unplug it. Remove food and any racks from doors.
Left Door
Disconnect water supply tube by pushing back on the disconnect ring (3).
Loosen the screws and remove the cover on back side (see figure A).
Loosen the cover screw (1).
Disconnect door switch wire (2).
Pull out the tube (4).
If a tube end is deformed or worn out, cut the damaged portion away.
Disconnect wire harness (5).
Loosen screws (7) and lift off the top hinge (8).
Place the door on a non-scratching surface with the inside up.
When removing top hinge, be careful that the door does not fall forward.
Loosen the cover screw (1).
Disconnect door switch wire (2).
Loosen screws (7) and lift off the top hinge (8).
Place the door on a non-scratching surface with the inside up.
Remove the grounding screw (6).
Figure A
3
(7)
(1)
(8)
(2)
(2)
(7)
(5)
(6)
(4)
(8)
(1)
Left Door
Right Door
Right Door
Loading ...
Loading ...
Loading ...