Loading ...
Loading ...
Loading ...
USING YOUR REFRIGERATOR
26
If you have changed the filter after
6 months of use or you wish to
reset the filter indicator screen,
NOTE
: The average life of the filter
press the FILTER button more than
3 second until you hear a beep,
is 6 months.
this will let you know that the
screen has been reseted.
It’s highly recommended to change the filter when the
indicator light is on or the water dispenser or the ice
dispenser changes drastically.
After changing the water filter cartridge, reset the water
filter status display and indicator light by pressing and
holding the BUTTON for 3 seconds.
3. Remove the old cartridge. Rotate the knob of the
How to change the old cartridge.
2. Dispense water from the system to empty the tubing
(approximately for 50 seconds).*
1. Turn the shutoff valve off (house valve).*
cartridge counter clockwise.
4. Replace with a new cartridge.
Pull out the cartridge.
NOTE: There will be water in the cartridge. Some spilling
may occur through the hole at rear bottom side of cover.
You may use a cup or something like that to prevent spilt
water drop into food.
When the cartridge is removed, it will click out of place.
Take the new cartridge out of its packaging and remove
protective cover from the o-rings.
With cartridge knob in the vertical position, push the new
filter cartridge into the cover until it stops.
If you can´t turn the filter from side to side, it isn’
t fully
inserted. Push it in firmly and twist it into place. You will
hear it click into place.
Using its handle, twist the cartridge clockwise about 1/4
turn. You will hear when it clicks into place.
Loading ...
Loading ...
Loading ...