Loading ...
Loading ...
Loading ...
Page 8 User Manual
Operating Instructions
COOL operation
• Press the “MODE” button until the “COOL”
indicator light comes on.
• Press the ADJUST buttons Up (
) or
Down ( ) to select your desired room
temperature. The temperature can be set
within a range of 17°C~30°C/62°F~86°F.
• Press the “FAN SPEED” button to choose the fan
speed.
HEAT operation
(available on HEAT models only)
• Press the “MODE” button until the “ ”
indicator light comes on.
• Press the ADJUST buttons Up (
) or
Down ( ) to select your desired room
temperature. The temperature can be set
within a range of 17°C~30°C/62°F~86°F.
• Press the “FAN SPEED” button to choose the fan
speed. For some models, the fan speed cannot
be adjusted while in HEAT mode.
DRY operation
• Press the “MODE” button until the “DRY”
indicator light comes on.
• While in this mode, you cannot select a fan
speed or adjust the temperature. The fan
motor operates at LOW speed.
• Keep windows and doors closed for the best
dehumidifying e ect.
• Do not connect the duct to a window.
AUTO operation
• When you set the air conditioner to AUTO mode,
it will automatically select cooling, heating
(cooling only models excluded), or fan only
operation depending on what temperature you
have selected and the current room temperature.
• The air conditioner will control room
temperature automatically according to the
temperature point set by you.
• Under AUTO mode, you cannot select the fan
speed.
FAN operation
• Press the “MODE” button until the ”FAN“
indicator light comes on.
• Press the “FAN SPEED” button to choose the fan
speed. The temperature cannot be adjusted.
• Do not connect the duct to a window.
TIMER operation
• When the unit is on, pressing the Timer button
will initiate the Auto-o stop program. The TIMER
OFF indicator light illuminates. Press the Up or
Down button to select the desired time. Press the
TIMER button again within 5 seconds. The Auto-
on start program is initiated and the TIMER ON
indicator light illuminates. Press the Up or Down
button to select the desired Auto-on start time.
• When the unit is o , press the Timer button to
initiate the Auto-on start program. Pressing it
again within ve seconds will initiate the Auto-
o stop program.
• Press or hold the Up or Down button to
change the Auto time by 0.5 hour increments,
up to 10 hours, then at 1 hour increments up
to 24 hours. The control will count down the
time remaining until start.
• The system will automatically revert back to
display the previous temperature setting if there
is no operation within 5 seconds.
• Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel the
Auto Start/Stop timer program.
• Should a malfunction occur, the Auto Start/Stop
timed program will also be cancelled.
SLEEP/ECO operation
Pressing this button will increase (during cooling
operation) or decrease (during heating operation,
applicable models) 1°C/1°F after 30 minutes.
The temperature will again increase (cooling)
or decrease (heating) by another 1°C/1°F after
an additional 30 minutes. This new temperature
will be maintained for 7 hours before returning
to the originally selected temperature. This ends
the Sleep/Eco mode and the unit will continue to
operate as originally programmed.
NOTE
This feature is unavailabe in FAN or DRY mode.
Operating
Instructions
Loading ...
Loading ...
Loading ...