Loading ...
Loading ...
Loading ...
Page 6 User Manual
and Features
Operating
Instructions
Control Panel Features
Swing Button
Used to initiate the Auto Swing feature. When the
operation is ON, pressing the SWING button can
stop the louver at the desired angle.
Timer button
Used to initiate the AUTO ON start time and
AUTO OFF stop time program, in conjuction with
the Up ( ) and Down ( ) buttons. The timer
on or off light will illuminate depending on the
selected setting.
Fan button
Controls the fan speed. Press to control the fan
speed in four steps - LOW, MID, HIGH and AUTO.
The selected fan speed light (except AUTO) will
illuminate. When AUTO is selected, no lights will
illuminate.
Mode button
Selects the desired operating mode. Each time
you press the button, a mode is selected in a
sequence that goes from AUTO, COOL, DRY,
FAN and HEAT (cooling only models excluded).
The mode light illuminates and indicates the
selected mode.
Up ( ) and Down ( ) buttons
Used to adjust (increasing/decreasing)
temperature settings in 1°C/1°F increments in
a range of 17°C/62°F to 30°C/86°F or the TIMER
setting in a range of 0 ~ 24hrs.
NOTE
Press the FAN button for 3 seconds to initiate
the ION feature, which helps remove pollen
and impurities from the air, and trap them in
the filter. Press it for 3 seconds again to turn
off the ION feature.
Power button
Power switch on/o .
Sleep (Eco)/Filter button
Used to initiate the SLEEP/ECO operation.
NOTE
The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius. To convert from one to
the other, press and hold the Up and Down
buttons at the same time for 3 seconds.
Timer
Button
Swing
Button
Power
Button
Sleep/Eco
Button
Fan
Button
Up ( ) and Down ( )
Buttons
Mode
Button
LED Display
Wi-Fi Indicator Light
(Wi-Fi models only)
Loading ...
Loading ...
Loading ...