Loading ...
Loading ...
Loading ...
message temporarily, push and release the MENU
button. To reset the oil change indicator system (after
performing the scheduled maintenance) refer to the
following procedure.
Vehicles Equipped With Keyless Enter-N-Go™
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
2. Fully push the accelerator pedal, slowly, three times
within 10 seconds.
3. Cycle the ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go™
1. Turn the ignition switch to the ON/RUN position (do
not start the engine).
2. Fully push the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
Using The DID Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the UP
or DOWN arrow
button to scroll through the main menu to “Vehicle
Info.”
• Push and release the RIGHT
arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one
second to reset the gauge and numeric display to
100% for ”Oil Life.”
• Push and release the UP
or DOWN arrow
button to exit the DID screen.
352 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...