Loading ...
Loading ...
Loading ...
If and when 235
Safety First Operating instructions Tips and Maintenance Technical Data
WARNING
• If you are driving without the spare wheel, the cable should be rolled up
and the bracket fastened to the floor of the luggage compartment.
Fitting the defective wheel in the spare wheel casing
1. Place the wheel behind the vehicle.
2. Insert the support on the inside of the defective wheel, through
a central opening.
3. Insert the defective wheel below the vehicle, with the outer side
facing downwards.
4. Remove the box spanner ⇒ page 234, fig. 152 and turn the
bolt on the floor of the luggage compartment several times to the
right, until the defective wheel is firmly secured against the
inside of the luggage compartment floor ⇒ in “Taking out
the spare wheel” on page 234.
5. Close the opening with the rubber seal ⇒ page 234, fig. 152
and lower the cover .
WARNING
Tighten the bolt of the luggage compartment to a maximum torque of 25
Nm.
Breakdown set*
Fig. 153 Resting point for
the spare wheel on the
bumper
A
C
A
B
A
A
alhambra_aleman.book Seite 235 Montag, 23. M‰rz 2009 1:12 13
Loading ...
Loading ...
Loading ...