Loading ...
Loading ...
Loading ...
Driving178
Lever for cruise control
The CCS can be operated using the controls on the turn signal
lever or on the multi-function steering wheel.
Switching on the system
– Move the control ⇒ fig. 133 to the left to ON. The
symbol
lights up in the combi-instrument when the cruise control system
is switched on.
Switching off system
– Move the control ⇒ fig. 133 to the right to OFF or press the
key ⇒ fig. 134 once.
Setting speed
– Press the lower part SET of the rocker switch ⇒ fig. 133 once
briefly when you have reached the speed you wish to set
⇒ fig. 134 . This speed is then stored and maintained.
Increasing the stored speed
– To reach the desired speed hold down the upper part of the
rocker button ⇒ fig. 133 or button ⇒ fig. 134 .
Reducing the set speed
– To reach the desired speed hold down the lower part of the rocker
button
⇒
fig. 133 or button
⇒
fig. 134 . The
speed falls as the vehicle is no longer accelerating, not due to
sharp braking.
If you increase speed by using the accelerator, the previously programmed
speed will be resumed when the accelerator pedal is released. This will not be
the case, however, if the vehicle speed is more than 10 km/h higher than the
stored speed for longer than 5 minutes. The speed will have to be stored
again.
Fig. 133 Turn signal and
main beam headlight
lever control and
rocker switch for
cruise control
A
A
A
B
Fig. 134 Multifunction
steering wheel: CCS
controls
A
B
A
A
A
B
-
+
A
B +
-
A
B -
alhambra_aleman.book Seite 178 Montag, 23. M‰rz 2009 1:12 13
Loading ...
Loading ...
Loading ...