Loading ...
Loading ...
Loading ...
8global.irobot.com
Operating Your Pool Cleaner - Plugging the Cable
Plug Type
To plug the cable (Fig A) into the socket on the power supply (Fig. B), please do the following:
1. Prepare the plug as seen in (Fig. C) with the key and 3 outside slots exactly as shown.
2. Fit exactly the key and the slots from cable plug with the corresponding key and slots from the power supply socket. (Fig. D)
3. Push the plug all the way into the socket of the power supply.
4. Once the plug is in, rotate the plug to the right to lock it into place (Fig. E).
5. To remove the plug, first rotate the plug to the left to unlock it, then pull it out (Fig. F).
cable
plug
power supply
socket
cable
plug
power supply
socket
slot
key
slot
key
Push and rotate
right to lock
Rotate left and
pull to unlock
Cable plug (A)
Socket (B)
A B C D
E
F
Operating Your Pool Cleaner - Power Button
a. Power LED
The blue LED flashes when the power supply is in standby mode and
lights continuously when the pool cleaner is operating.
b. “CLEAN” button
The button switches between “ON” and “STANDBY”.
IMPORTANT- After every cycle the pool cleaner will automatically go to “stand-
by”. In case you want to turn the machine off during the working cycle, press the
CLEAN button once and the LED will start flashing, indicating that the machine
has stopped running.
Loading ...
Loading ...
Loading ...