Loading ...
Loading ...
Loading ...
4127
Features of your vehicle
The high beam switches to low beam in
the below conditions.
- When the Smart High Beam is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected from
the on-coming vehicle.
- When the tail lamp is detected from the
front vehicle.
- When the surrounding is bright enough
high beams are not needed.
- When streetlights or other lights are
detected.
- When vehicle speed is below 35km/h
(22 mph).
CAUTION
The system may not operate nor-
mally in the below conditions.
• When the light from the on-com-
ing or front vehicle is not detect-
ed because of lamp damage, hid-
den from sight, etc.
• When the lamp of the on-coming
or front vehicle is covered with
dust, snow or water.
• When the light from the on-com-
ing or front vehicle is not detect-
ed because of exhaust fume,
smoke, fog, snow, etc.
• When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged.
• When there is a similar shape
lamp with the front vehicle’s
lamps.
• When it is hard to see because of
fog, heavy rain or snow.
• When the headlamp is not
repaired or replaced at an autho-
rised dealer.
(Continued)
(Continued)
• When headlamp aiming is not
properly adjusted.
• When driving on a narrow curved
road or rough road.
• When driving downhill or uphill.
• When only part of the vehicle in
front is visible on a crossroad or
curved road.
• When there is a traffic light,
reflecting sign, flashing sign or
mirror.
• When the road conditions are bad
such as being wet or covered
with snow.
• When the front vehicle’s head-
lamps are off but the fog lamps
on.
• When a vehicle suddenly appears
from a curve.
• When the vehicle is tilted from a
flat tire or being towed.
• When the LKAS (Lane Keeping
Assist System) warning light illu-
minates. (if equipped)
Loading ...
Loading ...
Loading ...