Loading ...
Loading ...
Loading ...
GB 32
What you need to consider
Safety instructions for the installation
• The connection must comply with national and local regulations.
• The appliance must always be earthed.
• This appliance must be connected by a qualified person and
comply with the local AS/NZS regulations.
• For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. The cable casing
should be of rubber.
• The connection cable must hang freely and is not to be fed through
a drawer.
• If you want to make a fixed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fitted in
the supply line.
• The worktop the hob is built into must be flat.
• The walls and the worktop surrounding the appliance must be heat
resistant up to at least 85 °C. Even though the appliance itself does
not get hot, the heat of the hot pan could discolour or deform the
wall.
• Damage caused by incorrect connection, installation or use, will not
be covered by the Manufacturer Warranty.
• The wall socket and plug must be accessible at all times.
• Ensure that the power cord will not come in contact with parts that
can become hot.
• Do not use an adapter or an extension lead to connect the
device to the electrical mains. Safe use of the device cannot be
guaranteed with these accessories.
• Installation, maintenance or repairs should only be carried out by
professionals who are authorized by the manufacturer, as failure to
do so will void the warranty.
• Disconnect the electricity from the appliance before starting any
repair work. Preferably unplug the appliance, switch the (automatic)
fuse(s) off or, in the event of a permanent connection, set the
switch in the power supply lead to zero.
INSTALLATION
Loading ...
Loading ...
Loading ...