Loading ...
Loading ...
Loading ...
10
HOW TO USE THE KEYPADS TO PROGRAM
THE CONTROLS
The HOT keypad is used to adjust the values associated 1.
with setup codes. Pressing the keypad will change the value
by increments. Rapid adjustment is possible by holding the
keypad down.
The WARM keypad will advance you through the setup 2.
codes. Pressing the keypad will advance you to the
next available setup code. Holding the keypad down will
automatically advance through the setup codes at a rate
of one per second.
The COLD keypad is used to select or deselect options.3.
Start Operating Setup
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to un-crate a
new commercial washer, hook it up, plug it in, and have a unit
that operates.
Units are preset at the factory for a 14-minute wash period and
3 rinses (no extra rinse).
SETUP CODES
The WARM keypad will advance you from code to code. The
HOT keypad will change the code value. The COLD keypad will
select or deselect options.
The setup code is indicated by the one or two left-hand
characters. The setup code value is indicated by the two or
three right-hand characters.
CODE EXPLANATION
601 6 REGULAR CYCLE PRICE
01
07
Represents the number of coinslide pushes
equal to the vend price when D code is set to CS
(Example: 6.02 = 2 coin slide pushes) This can
be set 0 - 5. Advance from 0 - 5 by pressing HOT
button.
For coindrop install when J code is set to Cd or
C_ Represents the number of quarters (coin 1);
may adjust from 0-39. (See VALUE OF COIN 1.)
Advance from 0-39 by pressing HOT.
Press WARM keypad once to advance
to next code.
800 8 ADDITIONAL RINSE OPTION
00
Ar
This option is either SELECTED “ON” or NOT
SELECTED “OFF.”
Not Selected “OFF.”
Selected “ON.”
Press COLD keypad once for this selection.
Press WARM keypad once to advance
to next code.
900 9 CYCLE COUNTER OPTION
00
0C
This option is either SELECTED “ON” or NOT
SELECTED “OFF.”
Not Selected “OFF.”
Selected “ON” and not able to be deselected.
Press COLD keypad 3 consecutive times to
select “ON.” Once selected “ON” it cannot be
deselected.
Press WARM keypad once to advance
to next code.
1.00 1. MONEY COUNTER OPTION
00
0C
C0
This option is either SELECTED “ON” or NOT
SELECTED “OFF.”
Not Selected “OFF.”
Selected “ON.”
Press COLD keypad 3 consecutive times to select
“ON” and 3 consecutive times to remove (Not
Selected “OFF”). Counter resets by going from
“OFF” to “ON.”
Press WARM keypad once to advance
to next code.
Selected “ON” and not able to be deselected.
To select “ON” and not able to be deselected, rst
select “ON,” then within 2 seconds, press COLD
twice, HOT once, and exit setup mode.
2.00 2. SPECIAL PRICING OPTIONS
00
SP
This option is either SELECTED “ON” or NOT
SELECTED “OFF.”
Not Selected “OFF.”
Selected “ON.”
Press COLD keypad once for this selection.
If SPECIAL PRICING OPTION is selected, you have access
to codes 3.XX through 9.XX.
Press WARM keypad once to advance to next code.
Options to use if SPECIAL PRICING is selected.
3.01 3. SPECIAL CYCLE PRICE
01 Represents the number of coin slide pushes may
adjust from 0 - 5. Advance from 0-39 by pressing
HOT.
Press WARM keypad once to advance
to next code.
5.00 5. TIME-OF-DAY CLOCK, MINUTES
00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0-59 minutes by pressing HOT keypad.
Press WARM keypad once to advance
to next code.
6.00 6. TIME-OF-DAY CLOCK, HOURS
(NOTE: Uses military time or 24 hr. clock)
00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0-23 hours by pressing HOT keypad.
Press WARM keypad once to advance
to next code.
Loading ...
Loading ...
Loading ...