Loading ...
Loading ...
Loading ...
compartment with the carrying strap at the
back.
X
Hook retaining spring hooks : of fastening
strap ; into the cargo tie-down rings.
X
Tighten fastening strap ;.
Inflating the collapsible spare wheel
(Mercedes-AMG GLS 63 4MATIC)
!
Inflate the collapsible spare wheel using the
tire inflation compressor before lowering the
vehicle. The wheel rim could otherwise be
damaged.
!
Do not operate the tire inflation compressor
for longer than eight minutes at a time without
a break. It may otherwise overheat.
The tire inflation compressor can be operated
again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the tire inflation compressor label and
on the tire sealant bottle.
X
Mount the collapsible spare wheel as descri-
bed (Y page 373).
The collapsible spare wheel must be mounted
before it is inflated.
X
Remove the tire inflation compressor from
the stowage space under the cargo compart-
ment floor (Y page 335).
X
Pull connector ? and hose B out of the
housing.
X
Remove the cap from the valve on the col-
lapsible spare wheel.
X
Screw union nut ; of hose B onto the valve.
X
Make sure on/off switch A of the tire infla-
tion compressor is set to 0.
X
Insert connector ? into a socket in your vehi-
cle.
Cigarette lighter socket: (Y page 307)
12 V sockets: (Y page 307)
Observe the notes on the cigarette lighter
(Y page 307). Observe the notes on sockets
(Y page 307).
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 140).
X
Press on and off switch A on the tire inflation
compressor to I.
The tire inflation compressor is switched on.
The tire is inflated. The tire pressure is shown
on pressure gauge =.
X
Inflate the tire to the specified tire pressure.
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
X
When the specified tire pressure has been
reached, press on and off switch A on the
tire inflation compressor to 0.
The tire inflation compressor is switched off.
X
Turn the SmartKey to position u in the igni-
tion lock.
X
If the tire pressure is higher than the specified
pressure, press pressure release valve but-
ton : until the correct tire pressure has been
reached.
X
Unscrew union nut ; on hose B from the
valve.
X
Screw the cap onto the valve of the collapsi-
ble spare wheel again.
X
Stow connector ? and hose B in the lower
section of the tire inflation compressor.
X
Stow the tire inflation compressor in the vehi-
cle.
Emergency spare wheel
381
Wheels and tires
Z
Loading ...
Loading ...
Loading ...