Loading ...
Loading ...
Loading ...
Installation Procedure
46
8 Hook the Base bracket to the
Joint fitting and secure it
temporarily
Hook the Base bracket on the
protrusion (D) of the Joint fitting,
and secure it temporarily using the
four supplied M5 screws (B).
• Pull out the cables.
• Be sure to secure screws (B)
tightly after making the
adjustment discussed in “Adjust
the Projection Angle” (P47).
9 Put the cables in to the pipe and
attach the covers
Thread any cables that are too
thick for the ceiling-mount bracket
hole through a separate hole you
have opened.
1 Pull the cables out of the cable
hole in the ceiling.
2 Put the cables inside the pipe.
3 Close the inner cover of the pipe
and then close outer cover of the
pipe.
Secure to the extension pipe
using the supplied M3 screw.
4 Connect the cables to the
projector.
D
B
B
Loading ...
Loading ...
Loading ...