Loading ...
Loading ...
Loading ...
10
ANTI-TILT DEVICE
A chain should be fitted by the installer within 50mm of the hose connection point to prevent strain on the hose
when the cooker is pulled forward. The chain should restrict the appliance movement to no more than 80% of
the hose length. After the chain is installed, check that there is no strain on the hose or gas connections when
the cooker is pulled as far forward as the chain allows.
The cooker is also supplied with two chains which are connected to the rear left and right of the appliance. The
chains should be connected to the wall directly behind the chains as low as possible to prevent the appliance
from tilting forward. If the appliance is installed between two cupboards, drill a hole on each side of the
cupboards, pass the chains through the holes and anchor the chains within each cupboard. Ensure the chain
connections are strong enough to support the weight of the appliance and taught to prevent it from tilting
forward.
WARNING: In order to prevent accidental tipping of the appliance, for example a child climbing onto the open
oven door, the stabilising means must be installed. Ensure the chains are correctly anchored to prevent the
appliance from tilting forward and to prevent strain on the hose when the cooker is pulled forward.
MAKE SURE THE ANTI-TILTING CHAINS ARE TAUGHT WHEN ANCHORED TO PREVENT THE
APPLIANCE TILTING.
Fig 08
Fig. 09
Loading ...
Loading ...
Loading ...