Loading ...
Loading ...
Loading ...
- Keep the appliance and its cord out of the reach of children.
- Never reach into the feeding tube with your ngers or an object while the appliance is
operating. Only use the pusher for this purpose.
- Always disconnect the appliance from the mains if you leave it unattended or before you
assemble, disassemble or clean it.
- Always unwind the mains cord completely before you switch on the appliance.
- Never let the appliance operate unattended.
Caution
- Never use any accessories or parts from other manufacturers or that Philips does
not specically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
- Always place the appliance on a stable, level and horizontal surface.
- Do not use the appliance outdoors.
- Avoid contact with moving parts.
- Make sure all parts are assembled properly before you switch on the appliance.
- Only use the appliance when the locking clamp is in locked position.
- Only unlock the locking clamp after you have switched off the appliance and the juicing screw
has stopped rotating.
- Do not remove the pulp container when the appliance is operating.
- Cut large ingredients into pieces that t into the feeding tube. Remove stones, cores, seeds and
thick peels from fruits or vegetables before juicing.
- Do not exert too much pressure on the pusher to avoid damage.
- Food colouring can discolour parts. This is normal and has no impact on the performance of the
appliance.
- To optimise the lifetime of the appliance, do not use it continuously for more than 30 minutes.
Built-in safety lock
The appliance is equipped with a built-in safety lock. The two safety pins on the motor unit ensure
that you can only switch on the appliance if you have placed the juicing unit and the pulp container
on the motor unit correctly.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic elds.
Before rst use
Thoroughly clean all parts before you use the appliance for the rst time (see chapter ‘Cleaning’).
Note: Make sure all parts are completely dry before you start using the appliance.
Preparing for use
Assembling the juicing unit
Always unwind the mains cord completely before you switch on the appliance.
1 Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow ( Á) points to
the ‘locked’ indication. (Fig. 2)
2 Insert the juicing screw into the juicing unit (Fig. 3).
3 Assemblethetwopartsofthelter(Fig.4).
4 Placethetwo-partlteroverthejuicingscrew(Fig.5).
ENGLISH 7
Loading ...
Loading ...
Loading ...