Loading ...
Loading ...
Loading ...
7
CHILD SAFETY
"ISOFIX" MOUNTINGS
Your vehicle has been approved in accor-
dance with the new ISOFIX regulation .
The seats, represented below, are fi tted
with regulation ISOFIX mountings:
There are three rings for each seat:
- two rings A , located between the
vehicle seat back and cushion, indi-
cated by a label,
This ISOFIX mounting system provides
fast, reliable and safe fi tting of the child
seat in your vehicle.
The ISOFIX child seats are fi tted with
two latches which are secured on the
two rings A .
When fi tting an ISOFIX child seat to the
right hand rear seat, before fi xing the
seat in place, fi rst move the centre rear
seat belt towards the middle of the ve-
hicle so as to not interfere with the op-
eration of the seat belt.
Some seats also have an upper strap
which is attached to ring B .
To attach this strap, raise the vehicle
seat's head restraint then pass the hook
between its rods. Then fi x the hook on
ring B and tighten the upper strap.
- a ring B , behind the seat, referred to
as the TOP TETHER for fi xing the
upper strap.
The incorrect installation of a
child seat in a vehicle compro-
mises the child's protection in
the event of an accident.
For information regarding the ISOFIX
child seats which can be installed in
your vehicle, refer to the table showing
the locations for installing ISOFIX child
seats.
Loading ...
Loading ...
Loading ...