Loading ...
Loading ...
Loading ...
NU1X Owner’s Manual •41
Message List
* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.
* Press any button to exit from these message displays.
Message Descriptions
bt
The instrument is standing by for Bluetooth pairing. While this message appears, you cannot operate the
instrument.
CLr
Displayed when the initialization (page 34) is completed.
con
Displayed when Musicsoft Downloader is started on a computer connected to the instrument. While this
message appears, you cannot operate the instrument.
E01
Displayed when the character code (page 27) is not appropriate for the file name of the Song which you
are selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other prob-
lems. This Song cannot be selected.
Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive. Dis-
connect and connect the device again, then execute the operation. If this message appears repeatedly
even when there aren't any other likely problems, the USB flash drive may be damaged.
The Song you have selected cannot be copied or deleted on this instrument. Copy or delete these types
of Songs on a computer.
The memory or the number of the files in the copy destination USB flash drive is full. Remove any unnec-
essary files in the USB flash drive.
E02
Indicates that the USB flash drive is protected.
E03
Displayed when the memory of the USB flash drive becomes full, or the number of files and folders
exceeds the system limit.
E04
Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to which
data has already been stored or deleted a number of times, first make sure that the device does not con-
tain important data, then format it (page 32) and connect to the instrument again.
EE1
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
EEE
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
End
Displayed when the current operation is completed.
EnP
The memory of the instrument or the USB flash drive is running out. We recommend that you remove any
unnecessary files (page 30) to ensure sufficient memory capacity before start recording.
FUL
The operation could not be completed because the instrument’s internal memory or the USB flash drive is
nearly full. If this message is shown while recording, your performance data may not be correctly saved.
n Y
Confirms whether each operation is executed or not.
Pro
Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file after
cancelling the read-only setting.
UnF
Displayed when an unformatted USB flash drive is connected. First make sure that the device does not
contain important data, then format it (page 32).
Uoc
Communication with the USB flash drive has been shut down because of overcurrent to the USB flash
drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the power of the
instrument again.
UU1
Communication with the USB flash drive has failed. Remove the USB flash drive and make the connec-
tion again. If the message appears even when the USB flash drive is connected properly, the USB flash
drive may be damaged.
UU2
This USB flash drive is not supported on this instrument, or too many USB flash drives may have been
connected. Refer to “About USB Devices” (page 31) for information on the USB flash drive connection.
§PS
The instrument is in Access Point mode and standing by for connection to an access point by WPS (page
38). While this message appears, you cannot operate the instrument.
§.P.S.
A malfunction occurred in the instrument while it was standing by for connection to an access point by
WPS (page 38). Reconnect the UD-WL01 (sold separately) to the instrument and try to connect to the
access point by WPS again.
Appendix
Loading ...
Loading ...
Loading ...