Loading ...
Loading ...
Loading ...
Connections
38 • NU1X Owner’s Manual
You can connect a smart device such as an iPhone or iPad to this instrument
via the USB wireless LAN adaptor UD-WL01, or the wireless MIDI adaptor
UD-BT01 or MD-BT01 (These adaptors are sold separately and may not be
available in some areas.). By using appropriate application tools on your
smart device, you can take advantage of convenient functions and get more
enjoyment out of this instrument.
For information about the compatible smart devices and application tools, access the
Web page of each application tool on the following page:
http://www.yamaha.com/kbdapps/
NOTICE
Do not place your smart device such as an iPhone/iPad in an unstable position. Doing so may
cause the device to fall and result in damage.
Connection with the wireless LAN adaptor (UD-WL01*)
*UD-WL01 (sold separately) may not be available depending on your area.
There are two types of connections with the USB wireless adaptor (UD-WL01) described below.
Connecting by Acccess Point Mode
The Access Point mode allows you to directly connect UD-WL01 (sold separately)
and a smart device such as iPhone/iPad, without the need for using an access point.
You can use this mode when there is not any access point available for connection to
the instrument, or when it is unnecessary to connect to another network while a smart
device is connected to the instrument.
1 Initialize the instrument (if necessary; see page 34).
2 Connect the UD-WL01 (sold separately) to the [USB TO DEVICE]
terminal.
3 Connect a smart device such as iPhone/iPad to the instrument
(as an access point).
Connecting by the Infrastructure Mode (Automatic Setup by WPS)
The Infrastructure mode uses an access point for data communication between a USB
wireless LAN adaptor and a network. You can use this mode when you connect to the
internet while connecting the wireless LAN adaptor to the instrument.
1 Connect the UD-WL01 (sold separately) to the [USB TO DEVICE]
terminal.
2 Hold down [WPS] on the UD-WL01 for three seconds.
3 Press the WPS button on your access point within two minutes
after step 2.
Connection with the wireless MIDI adaptor (UD-BT01/MD-BT01*)
*UD-BT01 (sold separately) / MD-BT01(sold separately) may not be available depending on your area.
For details on connections, refer to the “iPhone/iPad Connection Manual” on the website (page 9).
Connecting to a smart device such as iPhone/iPad ([USB TO DEVICE]/ [USB TO
HOST], MIDI [IN][OUT] terminals)
NOTE
• Before using the [USB TO DEVICE] ter-
minal, be sure to read “Precautions when
using the [USB TO DEVICE] terminal” on
page 31.
• When you use the instrument along with
an application on your smart device,
such as iPhone/iPad, we recommend
that you set your device to not emit radio
waves (for example, by setting “Airplane
Mode” to “ON”).
Access point
An “access point” refers to a device which
acts as a base station when data is trans-
mitted/received via a USB wireless LAN
adaptor.
Some access points are combined with
router or modem functions.
NOTE
When you change the Infrastructure mode
(see below) to the Access Point mode, ini-
tialize the instrument (page 34).
NOTE
Once you connect by Infrastructure mode,
you can connect to a network automatically
without executing steps 2 and 3.
Loading ...
Loading ...
Loading ...