Loading ...
Loading ...
Loading ...
Connections
NU1X Owner’s Manual •39
This instrument is equipped with Bluetooth functionality. You can input the sound of the audio data saved
in a Bluetooth-equipped device to this instrument and listen to it through the built-in speaker of the instru-
ment. Also, you can record the input audio data as an Audio Song (page 28).
* Bluetooth-equipped device
In this manual, “Bluetooth-equipped device” means a device that can transmit the audio data saved in it to the instrument using the Bluetooth function
via wireless communication; for example, smart phone, digital audio player, etc. For proper operation, the device must be compatible with A2DP
(Advanced Audio Distribution Profile).
Pairing with
Bluetooth
-equipped Devices
If you wish to connect your Bluetooth-equipped device to the instrument via Blue-
tooth, the device needs to be paired with the instrument first.
Once the Bluetooth-equipped device has been paired with this instrument, there is no
need to perform pairing again.
1 Hold down [FUNCTION] for 3 seconds.
The instrument will enter into Pairing mode. At the same time the (Bluetooth)
lamp will flash and “
bt
” message will appear on the display. To cancel the pair-
ing, press [
>/o] (Play/Pause).
2 On your Bluetooth-equipped device, set the Bluetooth function
to on and select “NU1X” from the connection list.
For details, refer to the Bluetooth-equipped device owner’s manual.
After pairing is completed, the (Bluetooth) lamp will light up and the message
will disappear and the display will turn dark.
3
Play back audio data on your
Bluetooth
-equipped device to confirm that
the built-in speakers of the instrument can output the audio sound.
When you turn on the instrument the next time, the last connected
Bluetooth
-
equipped device will be connected to this instrument automatically, if the
Bluetooth
function of the device and the instrument is set to on. If it is not connected automati-
cally, select the model name of the instrument from the connections list on the device.
Switching the
Bluetooth
Function On/Off
By default, the Bluetooth function will be set to on right after turning the instrument’s power on. However, you can
set the function to off when you want to disconnect the connection between the instrument and the Bluetooth-
equipped device, or when you want to try to connect the device to the instrument again, etc.
While holding down [FUNCTION], press the F6 key repeatedly (if necessary).
Using the
Bluetooth
audio function
Before using the Bluet ooth function, be sure to read “About Bluetooth” on page 40.
Pairing
“Pairing” means to register Bluetooth-
equipped devices on this instrument, and
establish the mutual recognition for wire-
less communication between the two.
NOTE
Only one Bluetooth-equipped device can be
connected to this instrument at a time
(although up to 8 devices can be paired to
this instrument). When pairing with the 9th
Bluetooth-equipped device has succeeded,
pairing data for the device with the oldest
connection date will be deleted.
NOTE
When the Bluetooth function of this instru-
ment is set to “Off,” standby for pairing with
the instrument is not enabled when holding
[FUNCTION] for 3 seconds. In this case, set
Bluetooth to “On” (See below.), and then
start pairing.
bt
Flashes.
Appears on the display.
NOTE
• Make sure to complete the settings on
the Bluetooth-equipped device within 5
minutes. After 5 minutes passed, the
Pairing mode ends automatically and the
(Bluetooth) lamp turns off.
• If you are required to enter a passkey,
enter the numerals “0000.”
NOTE
You can adjust the volume of the sound
input via Bluetooth by the [MASTER VOL-
UME] control. To adjust the volume balance
between your keyboard performance and
the input sound via Bluetooth, adjust the
volume on the Bluetooth-equipped device.
F6
Highest key (C7)
Loading ...
Loading ...
Loading ...