Loading ...
Loading ...
Loading ...
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
(Driver’s side)
Put the tube back in the clips and
install the reserve tank back in
place, making sure its bottom tab
is in the holder.
2.
3.
4.
5.
6.
7.
CONTINUED
Lights
Maintenance
313
TAB
BULB
CONNECTOR
HOLDER
10/06/24 17:02:48 31SVA650_318
Loading ...
Loading ...
Loading ...