Loading ...
Loading ...
Loading ...
Changing the door hinges
81
Removing the upper appliance
door
Loosen the cover by carefully in-
serting a flat-headed screwdriver into
the gap from below and remove it.
Unscrew the hinge part, turn it
180°, and fit it on the opposite side. If
necessary, drill holes for the screws.
Remove the upper cover by sliding
it forward from the back and then lift-
ing it up and off.
Remove the cover by lifting it up
and off.
Close the upper appliance door.
Danger of injury when removing
the appliance door!
As soon as the hinge plate has been
removed in the following instructions,
the appliance door is no longer se-
cure.
The appliance door must be held by
a second person.
Loosen the screws in the upper
hinge plate and pull the hinge plate
up and off.
Danger of injury when removing
the upper appliance door!
As soon as the hinge pin is located in
the upper appliance door rather than
in the middle hinge plate, the lower
appliance door is not secure and
could fall off.
Ensure that the hinge pin remains lo-
cated in the middle hinge plate and
in the lower appliance door.
Carefully lift the upper appliance door
up and off, and put it to one side.
Fit the cover on the opposite side.
Attach the cover on the opposite
side.
Loading ...
Loading ...
Loading ...