Loading ...
Loading ...
Loading ...
The correct temperature
25
Temperature display
In normal operation, the upper tem-
perature display shows the current
average refrigerator section tem-
perature and the lower temperature
display shows the highest freezer
section temperature currently being
recorded within the machine.
Depending on the ambient temperature
and the temperature setting, it can take
the machine a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.
If the temperature in the freezer
remains above 0°F (-18°C) for a long
time, check that the frozen food has
not started to defrost.
If it has, use the food as soon as
possible or cook it before freezing it
again.
Setting the temperature
Use the two and sensor buttons
for the relevant section to set the
temperature higher or lower.
The following changes will be seen on
the display when the sensor buttons are
touched:
– With the first touch: The last temper-
ature set flashes.
– Each subsequent touch: The temper-
ature changes in 1° increments.
– Keeping your finger on the sensor
button: The temperature changes
continuously.
Approximately 5seconds after the last
time a sensor button was touched, the
actual temperature inside the appliance
will automatically be displayed.
Temperature range
– The temperature in the Fridge Zone
can be set between 36°F (2°C) and
45°F (7°C).
– The temperature in the Freezer Zone
can be set between 7°F(-14°C) and
-15°F (-27°C).
Tip: If you have adjusted the tempera-
ture, wait for approx. 6hours if the
machine is not very full and for ap-
prox. 24hours if the machine is full
before checking the temperature dis-
play. It will take this long for an accurate
reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it
again.
Loading ...
Loading ...
Loading ...