Loading ...
Loading ...
Loading ...
Water connection
66
Information on the fresh water
connection
The machine may only be connected
to the fresh water supply by qualified
technicians.
Disconnect the machine from the
power supply before connecting it to
the fresh water supply.
Turn off the water supply before con-
necting the water supply line for the
ice cube maker.
The water quality must comply with
the requirements for drinking water in
the country in which the machine is
being operated.
WARNING! Connect to potable water
supply only.
Connection to the household water
supply must comply with the appli-
cable regulations in the country in
which the machine is being installed.
All units and systems used to supply
water to the machine must also com-
ply with the applicable regulations in
the respective country.
The appliance is only suitable for
connection to a cold water supply,
which
– is directly connected to the water
supply in order to ensure a circulation
of the water in the cold water line.
Avoid using a water line in which the
water is allowed to pool. This can af-
fect the taste of water and ice cubes.
– withstands the operating pressure.
– fulfills the hygiene regulations.
Water pressure on-site:
– Minimum: 21.76psi (1.5bar)
– Maximum: 87.02psi (6bar)
A shut-off valve must be provided be-
tween the water line and the water sup-
ply of the building to ensure that the
water supply can be cut off if neces-
sary.
Make sure that the shut-off valve is
still accessible after the appliance
has been installed.
Risk of damage!
If the water supply is cut off while the
ice cube maker is still in use the wa-
ter intake pipe can freeze up.
Turn the ice cube maker off if the wa-
ter supply is interrupted (e.g. while
on vacation).
Loading ...
Loading ...
Loading ...