Loading ...
Loading ...
Loading ...
Installation
74
Prepare the refrigerator for installation
as close as possible to its intended
installation location.
Release the power cord from the
back of the appliance.
Remove any cord clips from the back
of the appliance.
Connect the refrigerator to the house-
hold water supply as described in the
section on “Water connection”.
Connect the refrigerator to the power
supply as described in the section on
“Electrical connection”.
Move the refrigerator carefully to its
intended installation location.
Position the refrigerator with the back
right against the anti-tip device.
Aligning the machine
SW19/10
To align the machine, adjust the front
feet using the wrench supplied, en-
suring it is stable and level.
3
/
16
" (5)
If necessary, also align the appliance's
rear feet using the two front adjusting
devices (located next to the front
feet).
Using a socket wrench, turn the ad-
justing device clockwise to raise
the appliance up at the back.
Leveling the machine door
Ensure that you unscrew the ad-
justable foot from the lower hinge
plate until it sits on the floor. Then,
unscrew the foot by an additional
¼turn.
Loading ...
Loading ...
Loading ...