Loading ...
Loading ...
Loading ...
M Dynamic Mode MDM
Concept
M Dynamic Mode MDM makes it possible to
drive on a dry roadway with high longitudinal and
transverse acceleration but with limited vehicle
stability.
Only in the absolute limit area does the system
intervene for stabilization by reducing the engine
power and by braking interventions on the
wheels. In this driving condition, additional steer‐
ing corrections may be necessary.
General information
When M Dynamic Mode MDM is activated, the
active M xDrive program is: "4WD Sport".
You may find it useful to briefly activate MDM
under the following special circumstances:
▷ When driving in slush or on uncleared, snow-
covered roads.
▷ When freeing vehicle from deep snow or driv‐
ing off from loose ground.
▷ When driving with snow chains.
To increase vehicle stability, activate DSC again.
Safety information
Warning
When M Dynamic Mode is activated, stabilizing
interventions are carried out only to a reduced
extent. There may be a risk of accident or risk
of damage to property. Adjust driving style to
traffic conditions. Watch traffic closely and ac‐
tively intervene where appropriate. Do not jerk
the steering wheel in response to a warning.
Overview
Button in the vehicle
DSC OFF
Activating/deactivating MDM
Activating MDM
Press the button.
The MDM and DSC OFF symbols in
the instrument cluster light up.
Deactivating MDM
Press the button.
The MDM and DSC OFF symbols go
out.
Via M Setup
It is possible to configure M Dynamic Mode
MDM for Setup M1 or M2.
Via iDrive:
1.
"My Vehicle"
2. "Setup"
3. "Configure M1" or "Configure M2"
4. "DSC"
5. "MDM"
To open the required M Setup with the selected
settings, press the corresponding button on the
steering wheel:
Seite 200
CONTROLS
Driving stability control systems
200
Online Edition for Part no. 01402666865 - VI/19
Loading ...
Loading ...
Loading ...