Loading ...
Loading ...
Loading ...
Electronic Sound Systems
219
*
[AS08200( X)08/95]
■ Protect cassettes from exposure to direct sunlight, high
humidity and extreme heat or cold. If they are exposed to
extreme conditions, allow them to reach a moderate
temperature before playing.
*
[AS08300( X)08/95]
■ If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
*
[AS08400( X)08/95]
■ Loose labels on cassette tapes can become lodged in the
mechanism. Remove any loose label material before inserting
a cassette.
*
[AS08500( X)08/95]
■ Do not leave a tape in the cassette tape player when not in
use. High heat in the vehicle can cause the cassette to warp.
%
*
[AS08600( X)08/95]
Clock Operation
*
[AS08700( X)08/95]
How to view the clock mode
[AS08800( X)09/94]
Press the “CLK” button to display time. The time will continue
to be displayed until a radio or tape function is chosen. After
approximately 10 seconds, the time will again appear in the
display. To display radio or tape information only, press the
“CLK” button a second time.
[AS08900( X)09/95]
NOTE: The clock can be displayed or set whether the ignition
is on or off as long as the “CLK” button is depressed.
*
[AS09000( X)08/95]
How to set the clock
*
[AS09100( X)08/95] 1. Turn the radio on.
[AS09200( X)04/00] 2. Press and hold the “CLK” button, press the right (
a
) side of
the “SEEK” button to increase hours. Press the left (
b
) side
of the button to decrease hours. Press the right (
a
) side of
the “TUNE” or “TUNE DISCS” button to increase minutes.
Press the left (
b
) side of the button to decrease minutes.
*
[AS09300( X)09/95]
NOTE: The clock displays 12-hour time with no AM/PM
indications.
File:09unasx.ex
Update:Thu Feb 29 09:08:53 1996
Loading ...
Loading ...
Loading ...