Loading ...
Loading ...
Loading ...
Tuning and Editing Channels
31
[Auto Tuning] - Set all Digital TV channels automatically
1 Start Auto Tuning 2 Settings are made automatically
Digital TV Auto Tuning
All digital TV tuning data will be erased
Digital TV Auto Tuning
Scan
Searching
RF Ch
62
62
62
Channel Name
CBBC Channel
BBC Radio W
ales
E4
Type
Free TV
Free TV
Free TV
Quality
10
10
10
This will take about 3 minutes.
Digital TV
: 4
62 Cartoon Nwk
CH6
69
Free TV
10
Automatically retune
all Digital TV channels
received in the area.
●
All the previous tuning settings are erased.
●
When the operation is completed, the channel at channel position [1] will be displayed.
●
Search begins in the order from the lower channels to the higher channels.
●
If tuning has not been done completely
[Manual Tuning] (see below)
[Manual Tuning] - Set Digital TV channel manually
Normally use [Auto Tuning] or [Update Channel List] to update Digital TV channels on your channel list. If tuning has
not been done completely or for adjusting the direction of the aerial, use this function.
[CH27]
10
10
Stopped
No. Channel Name Type New
Digital TV: 0
0
0
Digital TV Manual Tuning
Physical Channel
Signal Quality
Signal Strength
522,50
MHz
select physical channel
start tuning
select offset
●
All channels found will be added to the Digital TV Channel List.
[Update Channel List] - Update channels automatically
You can add new channels, delete duplicated channels, update channel name and position automatically to Channel
List.
69CH 6
Searching
RF Ch Channel Name Type Quality
Digital TV Update Channel List
Scan
Digital TV: 0
This will take about 3 minutes.
●
Channel List is updated while keeping your settings in [Favourites Edit],
[Channel List], [Child Lock], etc.
●
Depending on the signal condition, the update may not work properly.
[New Channel Message] - Display a notification message
Selects whether to give a notification message when a new Digital TV channel is found. [Off] / [On]
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
●
Selecting OK will perform [Update Channel List].
●
Sometimes, mainly during summer months at night, the TV may pickup
distant
TV stations outside your broadcast due to favourable short term
ionosphere conditions. In such circumstances when you press OK button,
the TV did not add any new channels. This is normal.
[Signal Condition] - Check Digital TV signal
Selects a channel and checks the Digital TV signal condition.
●
To change the channel
CH
Channel Name
Signal Quality
Signal Strength
Network Name
RF Parameter
101 DZFinfokanal
RiksTV
0
2
4
6
8
10
[CH32] 562.00 MHz6940 kS/s
Digital TV Signal Condition
These bars show the maximum signal value of the selected
channel.
A good Signal Strength is not an indication of suitable signal for Digital TV reception. Please use the Signal Quality
indicator as follows:
[Signal Quality]:
●
Green bar Good
●
Yellow bar
Poor
●
Red bar Bad (Check the aerial)
to
th-l32x50a_book.indb 31th-l32x50a_book.indb 31 2/27/2012 5:30:09 PM2/27/2012 5:30:09 PM
Loading ...
Loading ...
Loading ...