Loading ...
Loading ...
Loading ...
49-60769 11
3. Remove the hinge cover. Carefully pull the wires
freeoftheclips.Disconnectthewire.
4. Remove the top door cap by inserting a flat head
screw driver into the gap between the door cap
and door case. Apply pressure to pop the door
cap out.
5. Unscrewthetophingefromthecabinetwhile
holding the door.
6. Lift the door straight off of the bottom hinge. Set
the door aside.
7. Unscrewandremovethebottomhingefromthe
cabinet.
INSTALLATION INSTRUCTIONS
Installation Instructions
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Tighten all hinge screws but avoid over-tightening
to prevent stripping.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
losing them.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard
TheFreshFoodandFreezerdoorsareheavy.Use
both hands to secure the doors before lifting.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
therightsidetotheleftside—ifyoueverwantto
change the hinges back to the right side, follow these
same instructions and reverse all references to left
and right.
IMPORTANT NOTES
REVERSING THE DOOR SWING
Phillips screwdriver
Flatheadscrewdriver
TOOLS REQUIRED
Masking tape
BEFORE YOU START
1. Unplug the refrigerator from its electrical
outlet.
2. Empty all door shelves, including the dairy
compartment.
IMPORTANT: Donotletdoordroptothefloor.To
do so could damage the door stop.
1. Unscrew4screwsontopoffrontcase.
2. Remove top front case cover and cover insert. The
cover insert slides out toward the bottom of the
cover.
Pliers
Screws
CoverInsert
Pull
Down
Front
Case
Cover
TopDoorCap
Hinge Cover
Clips
Hinge
Screws
Hinge
Screws
Bottom Hinge
Loading ...
Loading ...
Loading ...