Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
The basic layout of the induction cooktop is shown in the diagrams below.
DESCRIPTION DESCRIPTION
01 On/off power touch control 07 Cooking Zone Power (LHR) and timer LED display
02 Timer/Zone Power (LHR) touch control 08 Timer LED display
03 Timer/Zone Power (LHF) touch control 09 Cooking Zone Power (LHF) LED display
04 Timer/Zone Power (RH) touch control 10 Cooking Zone Power (RH) LED display
05 Decrease Power/Time touch control
06 Increase Power/Timer touch control
The induction cooktop appliance is operated by touching the control buttons, with the functions confirmed by
LED displays and acoustic signals. Clean glass surface with a damp cloth and dry before use.
Turning On and Turning Off the Cooktop Appliance
NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel on the appropriate
cooking zone. If the correct sized cooking vessel is not placed on the cooking zone, the Cooking Zone Power
display will indicate pan not detected. Settings can be changed, but the zone will not work until the pot is
replaced.
If the appliance is in Stand-By-Mode, it is put into Operating-Mode by pressing the On/Off touch control for at
least 1 second. A beep signal indicates the successful operation acoustically.
On all Cooking Zone Power Displays a ´0` will appear. The decimal points on the Cooking Zone Power
Displays will flash until a cooking zone is selected.
If there is no operation within 20 seconds, all the Cooking Zone Power Displays will automatically turn off
and the appliance will be re-set into Stand-By-Mode.
If On/Off is pressed for more than 1 second (in Operating-Mode), the appliance is switched off and is set
into the Stand-By-Mode again. The appliance can be turned off by pressing On/Off at any time.
If there is any residual heat remaining in a cooking zone, this will be indicated in the corresponding
Cooking Zone Power Display as a red “H”.
Note: All cooking zones have a pre-set limit on the length of time they will run without any setting changes
(table further in the manual).
02
01
03
04
05 06
07 08
09 10
3
Loading ...
Loading ...
Loading ...